Random Play; Tape Deck - Lenoxx CD7400 Instruction Manual

STOP MODE
1. IF "STOP" BUTTON IS PRESSED DURING PLAY OR PAUSE MODE, SYSTEM WILL GO TO STOP MODE.
SKIP MODE (SKIP UP
1. DURING PLAY OR PAUSE MODE, IF " SKIP + " BUTTON IS PRESSED IT WILL GO TO NEXT TRACK AND
DISPLAY THE TRACK NO. AND THEN REMAIN THE PLAY OR PAUSE MODE.
2. DURING PLAY OR PAUSE MODE, IF " SKIP - " BUTTON IS PRESSED. IT WILL GO BACK TO THE BEGINNING
OF THE TRACK, ORIGIANL TRACK NO. IS DISPLAY AND REMAIN THE PLAY OR PAUSE MODE.
3. AFTER STEP 2, PRESS " SKIP - " BUTTON AGAIN WILL GO TO THE PREVIOUS TRACK AND REMAIN THE
PLAY OR PAUSE MODE.
SEARCH MODE (SEARCH UP
1. DURING PLAY MODE, IF " SEARCH + " BUTTON IS PRESSED & HOLD FOR FEW SECONDS, IT WILL START
SEARCHING FORWARD.
2. DURING PLAY MODE, IF " SEARCH - " BUTTON IS PRESSED & HOLD FOR FEW SECONDS. IT WILL STAR
SEARCHING BACKWARDS.
REPEAT PLAY
THIS FUNCTION ALLOW TO REPEAT 1 SINGLE TRACK, 1 SINGLE DISC OR ALL DISCS:-
PRESS THE " REPEAT " KEYS REPEATEDLY TO SWITCH THE FUNCTION:-
REP. ALL DISC
NOTE : SINGLE TRACK REPEAT FUNCTION IS POSSIBLE IN NORMAL OR PROGRAMMED PLAYBACK, REPEAT
ONE DISC OR ALL DISCS IS ONLY AVAILABLE IN NORMAL PLAYBACK.

RANDOM PLAY

YOU CAN LISTEN ALL THE TACKS OF ALL AVAIALBLE DISCS IN A RANDOM ORDER BY THIS FUNCTION
1. PRESS "RANDOM" BUTTON ONCE, UNIT WILL PLAY ALL DISC RANDOMLY ; PRESS AGAIN, UNIT WILL
PLAY 1 DISC RANDOMLY.
2. PRESS "PLAY/PAUSE" BUTTON TO START RANDOM PLAYBACK.
3. ALL TRACKS OF ALL DISCS OR ALL TRACKS OF 1 DISC WILL BE STARTED PLAYBACK IN RANDOM
ORDER.
4. PRESS "RANDOM" BUTTON AGAIN TO CANCEL RANDOM MODE.
CD PROGRAMMING
UP TO 60 TACKS CAN BE PROGRAMMED TO BE PLAYED IN ANY REQUIRED ORDER FROM ONE CD OR ALL
CDs IN THE CD CHANGER.
1. SET IN CD MODE.
2. PRESS THE MEM/CLK-ADJ. BUTTON
3. PRESS THE "
4. PRESS SKIP OR
5. PRESS THE " MEM/CLK/ADJ. " BUTTON AGAIN TO STORE THE TRACK IN MEMORY.
6. REPEAT STEPS 2 TO 4 TO ENTER ADDITIONAL PROGRAM
7. PRESS PLAY/PAUSE BUTTON TO START PLAYBACK IN ORDER.
8. PRESS "STOP/BAND" BUTTON TO STOP PLAYBACK AND PRESS AGAIN TO CLEAR ALL PROGRAMMED
TRACKS.

TAPE DECK

GENERAL OPERATION
STOP / EJECT KEY
FAST FORWARD KEY &
FAST REWIND KEY
/SKIP DOWN
/SEARCH DOWN
REP. 1 DISC
" TO SELECT THE DESIRED DISC.
BUTTON TO SELECT THE DESIRED TRACK.
PRESS TO STOP ALL DECK OPERATION. PRESS AGAIN TO OPEN THE
CASSETTE DOOR.
PRESS TO START RAPID TAPE WINDING IN EITHER FORWARD OR REVERS
DIRECTION. PRESS STOP / FAST REWIND KEY EJECT KEYS WHEN THE
CASSETTE SPOOLS STOP TURNING.
)
)
REP. 1 TRACK
EN-6