Using The Display - Sony SCD-C222ES Operating Instructions Manual

Playing a Disc
Using the Display
7
Press b.
Playback starts from the first track. If you want to start
playing from a specific track, turn WAMSDDU to
select the track number before pressing W.
8
Adjust the volume on the amplifier.
Basic operations during play
To Press
stop play n
Pause play II
Resume play after pausing II orb
Locate a succeeding track Turn mAMSDP4 clockwise
0
Locate the beginning of the Turn NQAMSDDU
5.
current track or a preceding counterclockwise
track
2
0
Go to the next disc DISC SKIP
I
(;:
Select a disc directly DISC l-5
Eject the disc 62 OPEN/CLOSE
.*-.
c You can select the disc you want to start playing first
Press one of the DISC 1-5 buttons.
2".
c To select a layer you want to listen to when playing a hybrid
disc (page 10)
After you stop play using n , press SACD/CD repeatedly to light
either "SACD" or "CD".
2".
c To select a playback area you want to listen to when playing
a 2 channel + Multi-channel Super Audio CD (page 11)
After you stop play using n , press MULTI/2CH repeatedly to
light either "MULTI CH" or "2 CH."
Note
During playback, increase the volume level gradually starting
from the lowest level. The output from this unit may contain
band width that are out of the normal listening range. This may
cause damage to the speakers or ears.
The display window shows various information about the
disc or track being played. This section describes the
current disc information and information that appears for
each play status.
MENU TIME/TEXT
TIME/TEXT
DISPLAY MODE