Remote Parts Descriptions - Sony SCD-C222ES Operating Instructions Manual

Remote Parts Descriptions
q
CONTINUE button (11)
Press to resume normal play from Shuffle Play or
Program Play.
SHUFFLE button (19)
Press to selwt Shuffle Play.
PROGRAM button (20)
Press to select Program Play.
q
NAME INPUT button (25)
Press to enter the name input mode.
q
DISC/CAPS button (16, 25)
Press to select the disc.
Press to select the capital letter in name input mode.
q
Number buttons (16)
Press to enter the track numbers.
q
>I0 button (16)
Press to locate a track numbered over 10.
q
REPEAT button (18)
Press repeatedly to play all tracks or only one track on
the disc.
q
CHECK button (20)
Press to check the programmed order.
q
D button (12)
Press to start play.
II button (12)
Press to pause play.
W button (12)
Press to stop play.
q
AM.5 W/W (AMS: Automatic Music Sensor)
buttons (16)
Press to locate a specific track.
q
44/W buttons (17)
Press to locate a portion you
want
to play within a
track.
q
DISC SKIP +I- buttons (16)
Press to select the disc.
q
CDlt2 (COMMAND MODE) switch (6)
Select the command mode.
q
DISPLAY MODE button (13)
Press to turn off the information
q
SACDICD button (12)
Each time you press the button while the Hybrid disc
(page 10) is loaded, the layer changes between an HD
layer (the SACD/CD LED turns on) and CD layer (the
SACD / CD LED turns off).
q
MULTllZCH button (12)
Press to select the playback area when the 2 channel t
Multi-channel Super Audio CD is loaded. When you
select the Multi-channel playback area (page ll), the
MULTI / 2CH LED turns on.
q
TIME/TEXT/SPACE button (13.25)
Each time you press the button, the playing time of
the track, the total remaining time on the disc, or
TEXT information appears in the display.
Press to insert a space in name input mode.
q
ENTER button (25)
Press to decide the selection.
q
CLEAR button (20)
Press to delete a programmed track number
q
LEVEL ADJ button (23)
Press to adjust the output level balance for the Multi-
channel management function (page 21).
9
us