Sony SCD-C222ES Operating Instructions Manual page 22

Listening to a Multi-channel Super Audio CD
4
-7
---5
0
4.
(n3
0
c
::
About "large" or "Small" speaker
A "Large" speaker is a speaker that can reproduce bass
frequencies plentifully. If you select "Small" for the
surround speakers, the bass frequencies will come
from the front speakers and/or sub woofer.
For normal use, select "MCH Direct" or set all the
speakers to "Large" (ex. "5 - Large + SW," "5 - Large,"
etc.). If the sound is noisy or the Multi-channel
playback is not effective while playing a Multi-channel
Super Audio CD, change the settings of the speakers
concerned to "Small."
Turn Kt4 AMS DDM until desired mode appears in
the display.
Press KKI AMS M>(I.
The output level balance setting display appears.
To set the output level balance, go to Step 4 in
"Adjusting the output level balance on the front panel
of the player" on page 22 or Step 2 in "Adjusting the
output level from the remote" on page 23.
To return to the normal display, press MENU.
Notes
l
The Multi-channel
management function does not work when
you select "MCH Direct"
(you cannot set the output level
balance of each speaker).
l
The front speaker setting is set to "Large" automatically when
you set the Sub woofer to "-."
l
When you play a track that does not contain the LFE* signal,
the signal for the Sub woofer does not output. Therefore, when
you select "MCH Direct, " "5 -Large + SW," or "No - CNTR +
SW," no signal outputs from the Sub woofer. However, when
you select "5 -Small + SW" or "FRT - Large +Sw" (when you
set the speaker setting to "Small"), the bass frequencies will
come from the sub woofer.
* Low Frequency Enhancement (described as ".l CH")
You can adjust following items with the Multi-channel
management function:
CNTR BALANCE
The relative output level balance between the front
speakers (FRONT L/R) and the center speaker (CENTER)
SURR BALANCE
The relative output level balance between the front
speakers (FRONT L/R) and the surround speakers (SURR
L/R)
SW BALANCE
The relative output level balance between the front
speakers (FRONT L/R) and the sub woofer (SUB
WOOFER)
Note
Some adjustments may not work depending on the Multi-
channel playback mode that you selected.
Adjusting the output level balance on the front
panel of the player
You can adjust the output level balance of each speaker
while listening during playback. You can also adjust while
listening to the test tone during stop mode.
Press MENU.
Turn IKKI AMS DDU until "LEVEL ADJUST" appears
in the display.
Press Kl-4 AMS DOU.
During playback, go to Step 6.
Turn RI=4 AMS DDU until "TONE ON" appears in the
display.
Press o<K1 AMS DDU.
The test tone issues from the speakers in sequence
with the speaker type appearing in the display.
Turn KKI AMS DO0 until the desired item appears
in the display.
Select
the
item from "CNTR BALANCE," "SURR
BALANCE," or "SW BALANCE."
Note
When you set the Sub woofer to "-" in the Multi-channel
playback mode (page 21), "SW BALANCE" does not appear.
Similarly, "CNTR BALANCE" or "SURR BAL&NCE" does
not appear when you set the corresponding speaker to "-."
22"