Tv + Hdtv Tuner + Vcr + Dvd Player - GE HDTV Monitor User Manual

Hdtv monitor
Table of Contents

Advertisement

TV + HDTV Tuner + VCR + DVD Player

1. Make sure cable or antenna and/or satellite is connected to your HDTV Tuner.
A. Connect the coaxial cable from your cable outlet or antenna to the antenna input jack on the HDTV Tuner.
B. Connect the satellite dish antenna feed to the satellite input jack on the HDTV Tuner.
2. Make the video connection between your HDTV Tuner and the TV.
Connect three video grade cables to the CMP1 Y PB PR input jacks on the back of the TV and to the Y PB PR output
jacks on the HDTV Tuner.
3. Make the audio connection between your HDTV Tuner and the TV.
Connect the audio (white and red) cables to the CMP1 L and R audio input jacks on the back of the TV and to the
audio output jacks on the HDTV Tuner.
4. Connect your HDTV Tuner to your VCR.
A. Connect a coaxial cable to the HDTV Tuner's antenna output jack and to VCR's antenna input jack.
B. Connect the audio (white and red) cables to the audio output jacks on the HDTV Tuner and to the audio input jacks
on the VCR.
C. Connect the video cable to the video output jack on the HDTV Tuner and to the video input jack on the VCR.
5. Connect your VCR to your TV.
A. Connect a coaxial cable to the VCR's antenna output jack and to the ANTENNA/CABLE input jack on the TV.
B. Connect the audio (white and red) cables to the VID2 L/MONO and R audio input jacks on the back of the TV and
to the audio output jacks on the VCR.
C. Connect the video cable to the VID2 V (video) jack on the back of the TV and to the video output jack on the VCR.
6. Connect your DVD player to your TV.
A. Connect the audio (white and red) cables to the VID1 L/MONO and R audio input jacks on the back of the TV and
to the audio output jacks on the DVD player.
B. If your DVD player has an S-Video jack, connect an S-Video cable to the S-VIDEO input jack on the TV and to the
S-VIDEO output jack on the DVD player.
Notes: If your DVD player doesn't have an S-Video jack, connect the player to the TV's VID1 V (video) jack using a
video cable.
Chapter 1
Connections & Setup
Go to page 14
7

Advertisement

Table of Contents
loading

Table of Contents