Picture Menu - GE HDTV Monitor User Manual

Hdtv monitor
Table of Contents

Advertisement

Using the Menu System
Tip:
If the picture is switching screen formats
abruptly during normal TV viewing, switch the
Autoformat feature off.
34
Sound logic Reduces the annoying blasts in volume during commercial
breaks, and also amplifies softer sounds in program material. Eliminates the
need to constantly adjust the volume.
Dynamic bass Enhances your TV's low-frequency response. The options are
Off, Medium and High.
Headphone settings Displays a choice list of available settings you can
adjust: Volume, Bass and Treble. The Headphone sound option allows you to
choose stereo, mono or automatic. These descriptions are same as for Sound
Type (see the previous page).
Graphic equalizer Allows you to choose a specific preset through the
Sound Preset option. Press the right arrow button to cycle through the options:
Standard, Movie, Voice, Music, Flat, Videogame, Video camera and Personal.
The Frequency range displays the different treble and bass bands set for each
Sound Preset option. You can choose a band and make adjustments. When you
make adjustments, the Sound Preset option automatically changes to Personal.
Press the left or right arrow button to select the frequency (Bass 100Hz, Mid
Bass 500Hz, Medium 1.5kHz, Mid Treble 5kHz, Treble 10kHz) you want to
adjust. Then use the up or down arrow button to adjust the level.
To view the frequency range of another Sound Preset option, press the right or
left arrow until no band is selected and Frequency range is highlighted. Then
press the up arrow button to highlight Sound Preset.

Picture Menu

The Picture menu contains menus and controls to configure the following video
settings: Advanced picture settings, Picture presets, Black level, Color, Contrast,
Sharpness, Color Warmth, and Tint. The Picture menu options apply to the
video for the main TV and video input selections.
Advanced picture settings
Contrast expand You can adjust the contrast of the picture to suit the light
of the room. Press the right arrow button to choose which of the following
best describes the lighting in the room: Low, Medium or High.
Scan Velocity Modulation Improves the sharpness of the picture by
changing the speed of the cathode-ray tube's electron beam when it
transitions between dark and light areas of the screen. Choose to have it on
(box checked) or off (box unchecked), depending on your preference.
Autoformat When enabled (box checked) the TV automatically detects the
screen format the signal is sending for each channel, as well as video input
channels.
Chapter 4

Advertisement

Table of Contents
loading

Table of Contents