How To Use The Remote After You've Programmed It; Using The Input Button - GE HDTV Monitor User Manual

Hdtv monitor
Table of Contents

Advertisement

Component buttons
���
������
��
Chapter 2

How to Use the Remote After You've Programmed It

Because this universal remote can control several different components (TV,
������
DVD, VCR, satellite receiver, etc.) it uses operational modes triggered by the
component buttons. For example, if you want the remote to control the TV, you
would press the TV button to put the remote into TV mode before you could
control the TV.
1. Press the appropriate component button (DVD or AUX•HD) to set the
remote to control the component.
2. Press ON•OFF to turn the component ON or OFF.
3. Use the remote buttons that apply to that component.
Notes:

Using the INPUT Button

Use the INPUT button to scroll through the available video input channels and
view components you have connected to the TV.
1. Press TV to place the remote in TV mode. Make sure the component you
want to view is turned ON.
2. Press INPUT to tune to an available video input channel.
3. To return to the channel you were previously watching on TV, press CH+ or
CH- button.
Using the Remote Control
The remote may not be compatible with all brands and models of
components. It also may not operate all functions of the remote that
came with your component.
If you keep pressing buttons and nothing happens, the remote is
probably in the wrong mode. You must press the component button
that matches the component you want to operate (i.e., if you want to
operate the DVD player, press DVD on the remote control to put the
remote in DVD mode.)
21

Advertisement

Table of Contents
loading

Table of Contents