Changing The Default Password - Motorola SBG1000 User Manual

Overview Installation Troubleshooting Contact

Changing the Default Password

Caution!
To prevent unauthorized configuration, change the default password immediately when you first
configure the Motorola SBG1000 Wireless Cable Modem Gateway.
To change the default password:
1
On the SBG1000 Setup Program screen, click Admin to display the ADMIN — basic page:
2
Type the old password in the Old Password field; the default password is "motorola" (this field is case
sensitive).
3
Type the new password in the New Password field.
4
Type the new password again in the Verify Password field.
5
Click Apply to apply your changes.
Home Print
Configuration: Basic Gateway TCP/IP Wireless Print Server USB
X
34
Exit
FAQ Specifications Glossary License
SBG1000 Wireless Cable Modem Gateway User Guide