Wall Mounting The Wireless Gateway - Motorola SBG1000 User Manual

Overview Installation Troubleshooting Contact

Wall Mounting the Wireless Gateway

If you mount the SBG1000 on the wall, you must:
•
Locate the unit as specified by the local or national codes governing residential or business cable TV and
communications services.
•
Follow all local standards for installing a network interface unit/network interface device (NIU/NID).
If possible, mount the SBG1000 to concrete, masonry, a wooden stud, or other very solid wall material. Use
anchors if necessary; for example if you must mount the unit on drywall.
To mount your SBG1000 on the wall:
1
Print the Wall Mounting Template
Click the Print icon or choose Print from the File menu to display the Print dialog box. (The following image is
from Adobe Acrobat Reader
Be sure you print the template at 100% scale. Be sure Fit to page is not checked in the Print dialog box.
Click the OK button to print the template.
2
Measure the printed template with a ruler to ensure that it is the correct size.
3
Use a center punch to mark the center of the holes.
4
On the wall, locate the marks for the mounting holes.
Caution!
Before drilling holes, check the structure for potential damage to water, gas, or electric lines.
5
Drill the holes to a depth of at least 3.8 cm (1
Home Print
Configuration: Basic Gateway TCP/IP Wireless Print Server USB
on page 27:
®
running on Windows 2000; there may be slight differences in your version.)
1
/
X
25
Exit
FAQ
inches).
2
SBG1000 Wireless Cable Modem Gateway User Guide
Specifications Glossary License