Gateway > Port Triggers - Custom Page - Motorola SBG1000 User Manual

Overview Installation Troubleshooting Contact
Gateway > PORT TRIGGERS — custom Page
Use this page to create a custom Port Trigger:
Gateway > PORT TRIGGERS — custom page fields
Field Description
Name Enter the unique name for the Port Triggers. This is typically the protocol.
Enable Select the checkbox to enable the custom Port Triggers you are creating.
Protocol Enter the transport protocol used by the Port Triggers. The transport protocol can be TCP or UDP.
Port Range Enter the port range used by the Port Triggers. The first field is the start of the range the second field
(From:To) is the end of the range.
Session Enter session chaining if it is appropriate for the custom application you are configuring. Certain
Chaining applications may open up one or more ports in different port ranges to operate properly. The
selections are Disable, TCP, or TCP/UDP.
Session Interval Enter the session interval appropriate for the custom application you are configuring. If the Port
Triggers detects traffic on the port range within the session interval, it is considered to be traffic related
to the initial session. If the Port Triggers detects traffic on the port range after the session interval
expires, it is considered to be a new, and unique session.
Address Enter the address replacement method appropriate to the custom application you are configuring.
Replace
Multi Host Enter multiple host support if it is appropriate for the custom application your are configuring.
Port Triggers Displays a list of all Port Triggers you have defined and their configuration parameters.
Table
Priority Port Select the port to have a priority status.
Home Print
Configuration: Basic Gateway TCP/IP Wireless Print Server USB
X
55
Exit
FAQ Specifications Glossary License
SBG1000 Wireless Cable Modem Gateway User Guide