Wireless > Status Page - Motorola SBG1000 User Manual

Overview Installation Troubleshooting Contact
Wireless > STATUS Page
Use this page to view the wireless interface status.
Wireless > STATUS Page Fields
Regulatory Indicates the country the SBG1000 is manufactured for. The list of channels depends on the country's
Domain standards for operation of IEEE 802.11b
may see FCC USA, Europe, Spain, France, Japan, or some other country name in this field.
ESSID Displays the network name set on Wireless > Network page. For more information, see
(Network Name) Unique Wireless Network Name"
Channel Displays the radio channel for the access point. If you encounter interference, you can set a different
channel on the
RTS Threshold Displays the RTS Threshold set on the
Frag Threshold Displays the Fragmentation Threshold set on the
MAC Address Displays the
WEP Enabled Displays the type of Wired Equivalent Privacy (WEP) that is enabled. For more information, see
"Configuring Basic Wireless LAN Security"
MAC Access Displays the state of MAC access control setting. It is set on the
Control Page (see page 78).
• Allow Listed — Only IEEE 802.11b stations in the MAC access control list can access the wireless
LAN.
• Allow Any Station Access — Any 802.11b station can access the wireless LAN.
MAC Access Displays the
Control List Wireless > SECURITY — advanced
Home Print
Configuration: Basic Gateway TCP/IP Wireless Print Server USB
on page 72.
Wireless > NETWORK Page
SBG1000
MAC address.
MAC addresses of wireless clients having access. The list is set on the
X
75
Exit
FAQ
devices. Depending on the domain set at the factory, you
(see page 76).
Wireless > NETWORK
Wireless > NETWORK
on page 73.
Page.
SBG1000 Wireless Cable Modem Gateway User Guide
Specifications Glossary License
"Configuring a
Page.
Page.
Wireless > SECURITY — advanced