Programming The Key Assignment - Yaesu FT-7800R Operating Manual

M
ISCELLANEOUS
P
ROGRAMMING THE
Default FT-7800R functions have been assigned to "alternate" (press and hold in) function
of the front panel's [ LOW ( ACC )] key, as well as the Microphone's [ P1 ] / [ P2 ] / [ P3 ] / [ P4 ]
buttons' functions (for the MH-48
factory. These may be changed by the user, if you wish to utilize another function on one of
these keys.
To program the function assigned to a key:
1. Press and hold in the [ BAND ( SET )] key for 1/2 second to enter the Set mode.
2. Rotate the DIAL knob to select the Menu Item to be
configured ("#27 PRG PNL," "#28 PRG P1
(PRG ACC)," "#29 PRG P2 (PRG P)," "#30 PRG P3
(PRG P1)," or "#31 PRG P4 (PRG P2)").
3. Press the [ BAND ( SET )] key momentarily, then rotate
the DIAL knob to select the function you wish to assign
to the button you selected in the previous step.
4. Press the [ BAND ( SET )] key to save the new setting, then rotate the DIAL knob to select
another programmable button to modify, if desired, and repeat the above steps.
5. Press the [ BAND ( SET )] key momentarily to save the new setting, then press and hold in
the [ BAND ( SET )] key for 1/2 second to exit to normal operation.
60
S
ETTINGS
K
EY
; [ ACC ] / [ P ] / [ P1 ] / [ P2 ] buttons for MH-42
A6J
A
SSIGNMENTS
FT-7800R O
) at the
B6JS
M