Wi-Fi Repeating Function
WARNING:
Your router is preset with the optimum settings. Verizon does not
recommend changing these settings unless you are advised by
Verizon support. An incorrect setting can disable your router.
The following security settings are not available when you enable the Wi-Fi repeating
function (see
Configure WEP
•
WPA-PSK (TKIP)
•
WPA2-PSK (AES)
•
WPA-PSK (TKIP) + WPA2-PSK (AES)
•
The Wi-Fi repeating function cannot be used with Auto Channel. See
Security
on page 25.
To configure the Wi-Fi repeating function:
1.
Sign in to the web user interface.
2.
From the main menu, select Router Settings > Advanced > Wi-Fi Repeating Function.
3.
To use either bridge mode or repeater mode, select Enable Wi-Fi Repeating Function.
Verizon 4G LTE Broadband Router
on page 28):
Advanced Router Settings
59
Enhance Your Wi-Fi