Removal; Installation - Yamaha YB50 Service Manual

REAR BODYWORK, MUDGUARDS
3-4
REAR BODYWORK, MUD-
GUARDS

REMOVAL

1. Remove:
• Main switch cover.
Turn the cover to the left and pull
upwards.
2. Remove:
• Upper screws in ignition key panel
• Rear fairing assembly and headlight
NOTE:
Disconnect the headlight cable and indica-
tors.
3. Remove:
• Front lower fairing screws
• Carrier hook bolt
• Footrest lower cover screws
4. Remove:
• Battery cover
• Battery, fuse and starter relay
• Bottom footrest cover
• Footrest
• Bottom rear fairing
NOTE:
Disconnect indicator cables.
• Mudguards

INSTALLATION

Reverse the removal process.
NOTE:
After installing all plastic parts, check that all
hooks are properly attached.
INSP
ADJ