Yamaha YB50 Service Manual page 53

1
ENGINE REMOVAL
CABLES AND PIPES
1. Remove:
• Oil pipe
NOTE:
Position oil pipe so that the oil does not spill
out.
2. Remove:
• Bolts (trunk)
• Overflow bowl rivets
NOTE:
To remove the overflow bowl, take off the fuel
and oil caps and replace them immediately
after removing the bowl.
3. Disconnect:
• Battery cable
• Starter motor cable
• Magnetic flywheel cable
• Spark plug pipe
4. Remove:
• Rear brake cable
4-2
ENG
from side of oil pump.