Installation - Yamaha YB50 Service Manual

FRONT WHEEL

INSTALLATION

Reverse the removal process. Bear in mind the
following points.
1. Lubricate:
• Front wheel axle
• Bearings
• Oil seal (edges)
• Drive gear (speedometer)
Recommended lubricant:
Grease with lithium soap base
2. Install:
• Speedometer gear unit
NOTE:
Ensure that the two projections in the gear
unit are engaging with the flat surface of the
gear unit.
3. Install:
• Front wheel
NOTE:
Ensure that the projection (torsion stopper)
of the casing of the gear unit is correctly
positioned.
4. Tighten:
• Front wheel axle:
Front wheel axle:
4.8 m • kg
s WARNING:
s
Ensure that the brake pipe is correctly
positioned.
6-3
CHAS