Panasonic DP-80116P Operating Instructions Manual page 53

Copier Settings:
Printer Settings:
Scanner Settings:
Fax/Email Settings:
3
Select a mode with the Cursor Key or
Keypad
or
When selecting the Key Operator Mode:
(Ex: General Settings)
4
09 KEY OPERATOR MODE
ENTER PASSWORD=_
Input the Key
Operator Password
(3-digit)
(See page 13)
Changing the Initial Copier Modes
● Default function of each copy mode.
(See pages 57 and 58)
For Key Operator:
Original mode, Contrast, etc.
(See pages 58 and 59)
Changing the Initial Printer Modes
● Default function of each print mode.
(See page 59)
For Key Operator:
Job completion time, Page protection, Error page print,
Spool function, PS configuration, Font list print, Mailbox
data handling, etc.
(See page 60)
● Normally, you do not need to set the Printer Settings.
Special Printer Settings may be required when printing
text data directly to the printer from the MS-DOS
command prompt.
Changing the Initial Scanner Modes
● Original mode, Compression mode, Resolution, etc.
(See page 61)
Changing the Initial Fax/Email Modes
Refer to Operating Instructions (For Facsimile & Internet
Fax/Email).
4
Setting the desired Function
Parameter(s).
Select a setting with the Keypad.
Confirm a setting with the SET
Key.
5
Set the desired Function Parameter(s).
Select a mode with the Cursor Key or
Keypad.
Select a setting with the Keypad.
Confirm a setting with the SET Key.
3
5
Exits this
Function
Mode
6
Exits this
Function
Mode
53