Cautions Regarding Products After Repair - Haier H2SM-(9+12)HEK03/R2 Service Manual

Warning
Do not repair the electrical components with wet hands. Working on the equipment with wet
hands can cause an electrical shock.
Do not clean the air conditioner by splashing water. Washing the unit with water can cause
an electrical shock.
Be sure to provide the grounding when repairing the equipment in a humid or wet place, to
avoid electrical shocks.
Be sure to turn off the power switch and unplug the power cable when cleaning the
equipment. Theinternal fan rotates at a high speed, and cause injury.
Do not tilt the unit when removing it. The water inside the unit can spill and wet the furniture
Be sure to check that the refrigerating cycle section has cooled down sufficiently before
conducting repair work. Working on the unit when the refrigerating cycle section is hot can
cause burns.
Use the welder in a well-ventilated place. Using the welder in an enclosed room can cause

1.3 Cautions Regarding Products after Repair

Warning
Be sure to use parts listed in the service parts list of the applicable model and appropriate
tools to conduct repair work. Never attempt to modify the equipment. The use of
When relocating the equipment, make sure that the new installation site has sufficient
strength to withstand the weight of the equipment.
If the installation site does not have sufficient strength and if the installation work is not
conducted securely, the equipment can fall and cause injury.
Be sure to install the product correctly by using the provided standard installation frame.
Incorrect use of the installation frame and improper installation can cause the equipment to
fall, resulting in injury.
Be sure to install the product securely in the installation frame mounted on a window frame.
If the unit is not securely mounted, it can fall and cause injury.
H2SM-(9+12)HEK03/R2
2
Introduction
For integral
units only
For integral
units only
Domestic Air Conditioner