Haier H2SM- - annexe 9 Operation Manual
Split type room air conditioner
Hide thumbs
Also See for H2SM- - annexe 9:
- Operating manual (99 pages) ,
- Installation manual (52 pages) ,
- Service manual (50 pages)
Related Manuals for Haier H2SM- - annexe 9
Summary of Contents for Haier H2SM- - annexe 9
-
Page 1: Operation Manual
SPLIT TYPE ROOM AIR CONDITIONER OPERATION MANUAL H2SM-(9+9)HEA03/R2 H2SM-(9+12)HEA03/R2 Please read this operation manual before using the air conditioner. 00105... - Page 2 The products are fulfilled with the requirements in the directive 2002/95/EEC of the local and national legislation. Air conditioners must be European parliament and of the council on the Restriction of the use of Certain Haz- treated at a specialized treatment facility for re-use, recycling and recovery.
- Page 3 WEEE cias negativas para el entorno y para la salud de las personas. Contacte, por De acuerdo con la directiva 2002/96/CE del parlamento Europeo, Informa- favor, con el instalador o con las autoridades locales para obtener más infor- mos al consumidor acerca del reciclage de los productos Electrónicos y...
- Page 4 IMPORTANT INFORMATION REGARDING THE REFRIGERANT USED This product contains fluorinated greenhouse gases covered by the Kyoto The filled out label must be adhered in the proximity of the product charging Protocol. Do not vent into the atmosphere. port (e.g. onto the inside of the stop valve cover).
- Page 5 INFORMACIÓN IMPORTANTE EN RELACIÓN AL REFRIGERANTE UTILIZADO Este producto contiene los gases fluorados de efecto invernadora regulados La etiqueta rellenada debe pegarse cerca de la conexión de carga del pro- por el Protocolo de Kioto. No vierta gases a la atmósfera.
-
Page 6: Safety Instructions And Warnings
Safety Instructions and Warnings Before disposing an old air conditioner that Before starting the air conditioner, read the goes out of use, please make sure it's inop- information given in the User's Guide caref- erative and safe. Unplug the air conditioner ully. -
Page 7: Specifications
H2SM-(9+12)HEA03/R2 person. 3. If the fuse of indoor unit on PC board is broken,please change it with the type of T. 3.15A/ 250V. 4. The wiring method should be in line with the local wiring standard. -
Page 8: Safety Instruction
Do not attempt to install the air conditioner by yourself because improper works may cause electric shock, fire, water leakage. lnstallation in a inadequate place may cause accidents. Do not install in the following place. CAUTION Do not install in the... - Page 9 PROHIBITION PROHIBITION CAUTION Take fresh air occasionally especially Do not operate the switch with Do not use for the purpose of storage of food, art work, precise equipment, when gas appliance is running at the wet hand. breeding, or cultivation.
-
Page 10: Parts And Functions
Don't adjust it manually) Vertical blade Anion generator (adjust left and right air flow) (inside) Actual inlet grille may vary from the one shown in the manual according to the product purchased Outdoor Unit OUTLET CONNECTING PIPING AND ELECTRICAL WIRING... -
Page 11: Clock Set
Clock set When unit is started for the first time and after replacing batteries in remote controller, clock should be adjusted as follows: Press CLOCK button, "AM" or "PM" flashes. - Page 12 6. LOCK display displayed and this room temperature is only for reference. Clock set When unit is started for the first time and after replacing batteries in remote controller, clock should be adjusted as follows: Press CLOCK button, "AM" or "PM" flashes.
-
Page 13: Operation
When sudden power failure happens during unit operation in power failure resume mode, the air conditioner is not desired for use in a long period, please shut off the power supply in case that the unit automatically resume operation when power is re-supplied,... -
Page 14: Auto Operation
Press ON/OFF button, the unit stops. Hints Remote controller can memorize settings in each operation mode. To run it next time just select the operation mode and it will start with the previous setting. No reelecting is needed.(TIMER ON/OFF 、SLEEP、SWING needs reelecting) -
Page 15: Cool Operation
Hints On cooling only unit, heating mode is not available. Remote controller can memorize each operation status. When starting it next time, just press ON/OFF button and unit will run in previous status. No reelecting is needed.(TIMER ON/OFF、SLEEP、SWING needs reelecting) -
Page 16: Dry Operation
Hints On cooling only unit, heating mode is not available. Remote controller can memorize each operation status. When starting it next time, just press ON/OFF button and unit will run in previous status. No reelecting is needed.(TIMER ON/OFF、SLEEP、SWING needs reelecting) -
Page 17: Heat Operation
Remote controller: AUTO IN HEAT mode, warm air will blow out after a short period of the time due to cold-draft prevention function.When FAN is set to AUTO, the air conditioner automatically adjusts the fan speed according to room temperature. -
Page 18: Fan Operation
Press ON/OFF button, the unit stops. Hints In FAN operation mode, the unit will not operate in COOL or HEAT mode but only in FAN mode. A UTO is not available in FAN mode,And temp .setting is disabled. In FAN mode,SLEEP operation is not available. -
Page 19: Air Flow Direction Adjustment
Do not try to adjust the flap by hand. When adjusting the flap by hand,turn off the unit ,and use the remote controller to restart the unit. When humidity is high,condensate water might occur at air outlet if all vertical louvers are adjusted to left or right. -
Page 20: Operation Mode
RESET When TIMER function is set, the sleeping function Operation Mode can't be set up .After the sleeping function is set up, 1. In COOL,DRY mode if user resets TIMER function, the sleeping function will be cancelled; the machine will be in the state of 1 hours after SLEEP mode starts, temp. -
Page 21: Health Operation
The anion generator in the air conditioner can generate a lot of anion effectively balance the quantity of position and anion in the air and also to kill bacteria and speed up the dust sediment in the room and finally clean... -
Page 22: Timer On/Off Operation
Timer On/Off Operation Set Clock correctly before starting Timer operation You can let unit start or stop automatically at following times: Before you wake up in the morning, or get back from outside or after you fall asleep at night. - Page 23 Follow the same procedures in "Time setting for TIMER ON". (6) Time confirming for TIMER OFF After time setting, press SET button to confirm, "OFF" stops flashing Time displayed: Unit stops at X hour X min. To cancel TIMER mode...
-
Page 24: Emergency Operation
If an air conditioner is a model for both cooling and heating. Cooling when the room temperature at the start of operation is above 23 Heating when the room temperature at the start of operation is below 23 Test operation: Test operation switch is the same as emergency switch. -
Page 25: Maintenance
Use the timer effectively during operation During cooling operation prevent the penetration of direct sunlight with curtain or blind Use the louvers effectively If the unit is not to be used for a long time, turn off the power supply main switch. -
Page 26: Remote Controller
Maintenance For Smart Use of The Air Conditioner WARNING Before maintenance,be sure to turn off the system and the circuit breaker. Remote Controller Indoor Body Wipe the air conditioner by using a soft and dry cloth.For serious stains,use a neutral detergent diluted with water.Wring the water... -
Page 27: Replacement Of Air Purifying Filter
The photocatalyst air purifying filter will be solarized in fixed time. In normal family, it will be solarized every 6 months. Please keep the bacteria-killing medium air purifying filter in the cool and dry conditions avoid long time directly sunshine when you stop using it,or its ability of sterilization will be reduced. -
Page 28: Troubleshooting
Should there be a big noise from air flow in unit operation, air filter may be too dirty. This is because the system circulates smells from the interior air such as the smell of Smells are generated.