11.4.3
Recovery blade
(1) Turn the cleaner unit upside down.
(2) Remove the three separation claws (4 screws).
Refer to 11.4.4.
(3) Remove the recovery blade (2 screws).
11.4.4
Separation claw
(1) Turn the cleaner unit upside down.
(2) Remove the spring.
(3) Remove the lever from the fitting sections of
the separation claw holders.
(4) Remove the 4 screws and take out the separa-
tion claw with the holder.
3560/70 CLEANER
Spring
11 - 2
Recovery blade
Separation claw
Lever
Separation
claw holder
Nov. 1997 © TOSHIBA