Table of Contents
Advertisement
CLEANING
MAINTENANCE
AND
Make sure the gas valve knob is in the "OFF" position. Wait at least five (5) minutes before start -
ing maintenance.
VENTING SYSTEM
A qualifi ed agency should examine the venting system annually.
CLEANING GLASS
Clean the ceramic glass periodically. Condensation will some-
times form on the glass during a cold startup. This is normal for
all gas fi replaces and inserts. This condensation often attracts
dust and lint to the surface of the glass. The initial paint curing
of the appliance can also leave a slight fi lm on the glass. This
is a temporary problem.
Your should clean the glass after the fi rst two weeks of use. After that, you should clean the glass no more than two or
three times a season. Use a mild glass cleaner to clean the door. Do not use abrasive cleaners. They will damage the glass
surface.
PILOT AND
BURNER FLAMES
Visually check pilot and
burner fl ames periodically.
See Figure 41 for typical
burner fl ame. See Figure
42 for typical pilot fl ame.
32
Figure 41 - Typical Burner Flame
Thermocouple
Figure 42 - Typical Pilot Flame
Let glass cool before cleaning. Do not
clean glass when it is hot. Damage
could occur.
Thermopile
Thermopile
57D0016
Advertisement
Table of Contents
