Datalogic Jet User Manual page 48

Hide thumbs Also See for Jet:

Table of Contents

DATALOGIC JET™

The Scan Parameters are common to all scanner modules and allow control of the

scanning device (i.e. beeper control, LED control, laser timeout, etc.).

Each Data Capture screen window corresponds to a branch of the tree, and the

name of the current branch is displayed at the bottom of each screen window.

Data Capture Configuration Window

The screen format shows two columns where the left column indicates branches or

parameters. Branches have three dots in the right column (...). You can navigate

through the tree structure using the stylus or keyboard arrows directly on the item

field or from the menu.

Parameters have their corresponding current values in the right column. You can edit

parameter values using the stylus or keyboard arrows directly on the item field or

from the menu. To change a value for example, select the line of the value to be

changed, choose Edit from the Parameter Menu then choose a new value from the

values listed in the box (see following figures).

Table of Contents