Ftp Server Setup - Datalogic Jet User Manual

Hide thumbs Also See for Jet:

Table of Contents

USE AND FUNCTIONING

3.8.3

FTP Server Setup

The Datalogic Jet™ Operating System includes a sample File Transfer Protocol

(FTP) server. FTP is used for copying files to and from remote computer systems

over a network using TCP/IP. You can establish a connection to your Datalogic Jet™

using its FTP Server through the following interfaces:

WLAN using the Wi-Fi radio

LAN through the Datalogic Jet™ Ethernet Multi Cradle (see par. 3.7.5)

Proceed as follows:

Create a registry file (extension .reg) to setup and enable FTP Server

communication. A simple example file for anonymous logon is given below:

REGEDIT4

[HKEY_LOCAL_MACHINE\Comm\FTPD]

"DefaultDir"="\\"

"AllowAnonymousUpload"=dword:00000001

"UseAuthentication"=dword:00000000

"BaseDir"="\\"

"IsEnabled"=dword:00000001

"LogSize"=dword:00001000

"DebugOutputMask"=dword:00000017

"DebugOutputChannels"=dword:00000002

"IdleTimeout"=dword:0000012c

"AllowAnonymous"=dword:00000001

"AllowAnonymousVroots"=dword:00000001

Copy this file to the Datalogic Jet™ using ActiveSync

Launch the .reg file from the Datalogic Jet™.

Perform a software reset on the Datalogic Jet™.

From the PC > Explorer address bar (or running an FTP Client from the PC),

enter the Datalogic Jet™ IP address.

For more information on FTP Client/Server connections refer to the

following web page:

http://msdn2.microsoft.com/en-us/library/aa922316.aspx.

NOTE

Table of Contents