IOGear MiniView GCS632U Installation Manual page 16

Operation
Alternate Hotkey Invocation Keys
An alternate set of Hotkey Invocation
keys is provided in case the default set
conflicts with programs running on the
computers.
To switch to the alternate Hotkey Invo-
cation set, do the following:
1. Invoke Hotkey Mode (see p. 10)
2. Press and release the [H] key
The Hotkey Invocation keys become the
[Ctrl], [F12] (instead of [Num Lock] and
minus [-]).
Note: This procedure is a toggle between the two
methods. To revert back to the original Hotkey In-
vocation keys, Invoke Hotkey Mode, then press and
release the [H] key again.
Alternate Basic Hotkeys to switch
ports
The Basic Hotkeys to switch ports can
Alternate Basic Hotkeys to switch ports
The Basic Hotkeys to switch ports can
be changed from tapping the [Scroll
Lock] key twice to tapping the [Ctrl] key
twice ([Ctrl] [Ctrl]). To make the change,
do the following:
13