Advertisement
Advertisement
Table of Contents
Related Manuals for IOGear MiniView Micro Audio GCS614A
Summary of Contents for IOGear MiniView Micro Audio GCS614A
- Page 1 MiniView™ Micro Audio 4 Port KVM Switch with Built-in KVM Cables Quick Start Guide (GCS614A) ®...
- Page 2 Before you begin, please turn off the computers you are going to connect to the MiniView™ Micro Audio. NOTE: To prevent damage to your equipment due to static electric discharge, please make sure that all devices on the installation are properly grounded. 1.
- Page 3 Step. 2 1. Connect the VGA cable that is built into the KVM cable of your MiniView™ Micro Audio to the VGA port on your computer. 2. Connect the PS/2 keyboard cable that is built into the KVM cable of your MiniView™ Micro Audio to the PS/2 key-board port on your computer.
- Page 4 Turn on the power to the computers. Operation Accessing all of your computers from a single console could not be easier. The GCS614A uses Hotkey combinations to give the KVM focus to the computer of your choice. The GCS614A provides the following Hotkey features: •...
- Page 5 Congratulations! Congratulations! You have completed installing ® the IOGEAR MiniView™ Micro Audio.
- Page 6 MiniView™ Micro Audio 4 Port KVM Switch with Built-in KVM Cables Quick Start Guide (GCS614A) IOGEAR 23 Hubble Drive Irvine, CA 92618 866.946.4327 949.453.8785 Web-site: www.iogear.com E-mail: info@iogear.com ® Entire contents copyright 2003 IOGEAR All rights reserved. Reproduction in whole or in part without permission is prohibited.
Need help?
Do you have a question about the MiniView Micro Audio GCS614A and is the answer not in the manual?
Questions and answers