Notes On Functions - Siemens HiPath 3000 User Manual

Notes on security and functions

Notes on functions

6
The reception telephone is not designed for direct
connection to the telecom network. This connec-
tion must be made via HiPath system.
Do not operate the reception telephone in the im-
mediate vicinity of radio equipment or mobile
phones.
The telephone must be kept out of range of sourc-
es of electrical or magnetic interference, e. g. mo-
tors or magnets.
Place the telephone on flat, even surface.
Do not situate the telephone in the vicinity of heat
sources and avoid exposure to direct sunlight.
The telephone must not be installed in rooms in
which large quantities of dust accumulate.
The telephone must not be subjected to severe
shocks or vibrations; do not install the telephone at
an inclined angle.
The outlets for the speaker and the handsfree mi-
crophone must always be kept free.
The plastic feet are liable to leave unsightly marks,
especially on lacquered and polished items of
furniture. You are therefore advised always to use
a non-slip underlay on sensitive surfaces.
Clean the telephone with a slightly damp cloth or
with an antistatic cloth. Never use a dry cloth. Do
not use any abrasive cleaning agents.
If your communication platform does not have a
un-interuptible power supply, the reception tele-
phone cannot be operated in the event of a power
failure.