Alarm Messages - Siemens HiPath 3000 User Manual

Alarm messages

Alarm messages
Alarm message:
Printer is not re-
sponding
Wakeup unsuc-
cessful
74
The alarm key light flashes on the reception tele-
phone during alarm messages and the correspond-
ing message is displayed. An alarm signal is also
sounded. This audible signal can be activated or
deactivated as required ( → page 71).
The following alarm messages may occur during
operation:
Possible cause:
The printer is
switched off.
The printer is not
connected.
The printer is offline. Switch the printer to online (if neces-
There is no paper in
the printer.
The guest has not
responded to the
wakeup signal.
Corrective measure:
Switch the printer on.
Connect the printer and switch it on.
sary, check why the printer is offline,
e.g. because of a paper blockage).
Insert paper, switch the printer to
online.
Waken the guest.