Sending/Deleting Messages; Sending A Message - Siemens HiPath 3000 User Manual

Sending/deleting messages

Sending/deleting messages

Sending a message

1.
Message ON
2.
Room 16
30
You can signal that a message is waiting at recep-
tion on a guest's room telephone.
Depending on the type of room telephone used,
this is signalled either by an illuminated (message)
LED or by a message on the display.
Press the key shown.
(MWL=Message Waiting Lamp)
Press the key assigned to the required room. A
light immediately lights up on the room telephone
to signal that a message is waiting.
Active message waiting signals are saved
for each room and are included on the
room list printout ( → page 32) under the
heading MWL ("Message Waiting Lamp").