Tips Of Setting Up The Dns And Mail Servers For Email - Toshiba e-Studio 3500c Network Administration Manual

1 Setting up Network Server
To send the Internet Fax and Email documents from this equipment, and receiving the Internet
Faxes from the Internet, you must configure the DNS server and mail servers properly.
Tips for configuring the DNS server and mail servers for this equipment features are described
in the following sections:
P.30 "Tips of Setting up the DNS and Mail Servers for Email"
P.31 "Tips of Setting up the DNS and Mail Servers for Internet Fax"
P.31 "Tips of Setting up the DNS and Mail Servers for Offramp Gateway"
When using DDNS and the IP address is assigned using DHCP, enable "006 DNS Servers"
and "015 DNS Domain Name" in the DHCP Server's Scope Options or Server Options.
When using DDNS, make sure the "Allow dynamic updates?" option is set to "Yes" (for Win-
dows 2000 Server) or "Nonsecure and Secure" (for Windows Server 2003) for the Forward
Lookup Zones and Reversed Lookup Zones. If setting of Windows Server 2003 is "Secure"
mode or "None" for this DDNS function, you need to set the correct primary login name and
primary password for update the DNS server by DDNS, or add the equipment's host name
manually in the Forward and Reversed Lookup Zone.

Tips of Setting up the DNS and Mail Servers for Email

The Email transmission from this equipment works same as sending an Email message from a
client computer. To do this, you configure the DNS servers and mail servers.
Because the Email is one way transmission forwarding to the Internet, only the SMTP server is
required for the transmission. To enable sending a Scan to Email document to the Internet, the
DNS server should be configured to enable accessing the Internet using the DNS service.
30 Setting up DNS and Mail Servers