Section A: Installation Information; Framing Dimensions; Trim Mounting - Dimplex BFSL33 Installation Manual

SECTION A: INSTALLATION INFORMATION

FRAMING DIMENSIONS

Figure 1
Rough-In Framing Dimensions Rough-In Corner Framing
Firebox Dimensions
This fireplace is a zero clearance design. No combustibles can be placed on
the top surface of the fireplace. Combustibles may be installed to the edge of
the unit. Four mounting flanges on the sides of the unit are provided to facili-
tate installation. Insulation and vapor barrier should be placed a minimum of 2"
(5.1 cm) from the unit.

TRIM MOUNTING

Figure 2
This fireplace comes with three trim pieces, top and two sides. The top piece is
secured with screws at either end and one in the middle. The two side pieces
require a tab to be inserted in the center slot then secured with a screw at the
top and bottom.
www.dimplex.com
4