Other Convenient Tape Functions - JVC KS-F545 Service Manual

Other convenient tape functions

Skipping the blank portions on the tape
You can skip blank portions between the tunes
(Blank Skip).
When this function is on, the unit skips blank
portions of 15 seconds or more, fast-forwards to
the next tune, then starts playing it.
• See also "Changing the general settings (PSM)"
on pages 15 and 16.
1
Press and hold SEL (select) for more
than 2 seconds so that one of the
PSM items appears on the display.
(PSM: see page 16.)
2
Press ¢ or 4
"B. SKIP (blank skip)."
3
Press + to select "ON."
Now Blank Skip is activated.
4
Press SEL (select) to finish the
setting.
To cancel Blank Skip, repeat the same procedure
and select "OFF" in step 3 by pressing –.
Playing the current tune repeatedly
You can play the current tune repeatedly (Repeat
Play).
To play back tracks repeatedly (Repeat Play)
MODE
RPT
to select
When the repeat mode is turned on, the RPT
indicator lights up on the display.
Note:
In the following cases, Blank Skip and Repeat Play
may not operate correctly:
– Tapes with tunes having long pianissimo passages
– Tapes with short non-recorded sections.
– Tapes with high level noise or humming between
– Tapes with tunes recorded at low recording levels.
1
Press MODE to enter the functions
mode while playing a tune. This unit
enters the functions mode.
2
Press RPT (Repeat), while still in the
functions mode, so that the RPT
indicator lights up on the display.
Then, each time you press the
button, repeat play mode turns on
and off alternately.
Lights up when Repeat Play is turned on.
(very quiet parts) or non-recorded portions during
tunes.
tunes.
11