Disassembly Method - JVC KS-F545 Service Manual

2.1 Main body
2.1.1 Removing the front panel assembly
(See Fig.1)
(1) Press the release button and remove the front panel as-
sembly.
2.1.2 Removing the bottom cover
(See Fig.2)
(1) Turn the main body upside down.
(2) Insert a screwdriver under the joints to release the two
joints a on the left side, two joints b on the right side and
joint c on the back side of the main body, then remove the
bottom cover from the main body.
CAUTION:
When releasing the joints using a screwdriver, do not damage
the main board.
2.1.3 Removing the front chassis
(See Fig.3)
• Prior to performing the following procedures, remove the front
panel assembly and bottom cover.
(1) Remove the screw A on the both sides of the main body.
(2) Release the two joints d and two joints e on the both sides
of the main body, then remove the front chassis toward the
front.
SECTION 2

Disassembly method

Joint a
Joint a
Front panel assembly
Fig.1
Bottom cover
Joint c
Fig.2
Joint d
A
Joint d
Front chassis
Fig.3
KS-F545
Release button
Joint b
Joint b
Joint e
Joint e
(No.49828)1-3