Connect Keyboard; Lxe Keyboard; Figure 41 Keyboard Connection Location And Keyboard - LXE VX7 User Manual

Connect Keyboard

Connect Keyboard

LXE Keyboard

The VX7 has an external 9-pin connector for the keyboard. All LXE keyboards are connected in a
similar fashion. The keyboard is attached to the connector labeled "KEYBOARD". The keyboard
receives power from the VX7.
1. Turn the VX7 off before attaching the keyboard cable.
2. Insert the keyboard cable into the VX7 keyboard connector.
3. Once the pins are firmly seated, tighten (turning clockwise) the thumbscrews.
4. Secure the cable with a strain relief cable clamp.
5. Turn the VX7 on.
E-EQ-VX7OGWW-A
IP66
U L
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECT TO THE FOLLOWING TWO
LISTED
CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL
C US
I.T.E.
INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY
®
REFER TO INTERFERENCE RECEIVED, INCLUDING INTERFERENCE
MANUAL E-130794
THAT MAY CAUSE UNDESIRED OPERATION.
N107
PRODUCT OF U.S.A. U.S. PATENT 5862393
COM1 / SCANNER COM2 KEYBOARD /

Figure 41 Keyboard Connection Location and Keyboard

CAUTION: For continues protection against risk of fire,
replace only with same type and rating of fuse.
This Class A digital apparatus complies with
Canadian ICE-003.
ATTENTION: Pour ne pas compromette la preotection
Cet appareil num érique de la Classe A est
contre les risques d'incendie, remplacer par un fusible
confirme l à n orme NMB-003 du Canada
de mmes types de mmes caractristques nominales. ê ê
AUDIO
INPUT:
12-80VDC
6A 72W
ETHERNET /
MOUSE USB
T10A, 125V
47
é
VX7 User's Guide