Parts Of The Ua-3 And Their Function - Edirol UA-3 Getting Started Manual

Introduction

Parts of the UA-3 and their function

fig.01-06
7
8
1
Mic input jack
2
Line input jacks
3
Line output jacks
4
Digital input connector (optical)
5
Digital output connector (optical)
6
USB connector
7
Mic type select switch
Set this switch according to a type of mic that is connected to the Mic input jack
• When connecting a dynamic mic:
• When connecting a condenser mic: "CONDENSER"
8
Recording input select switch
This selects the input that will be used for recording.
• Digital input connectors
• Mic input jack
9
USB indicator
This will light when the UA-3 is connected and recognized to the computer.
8
1 2
12
13 14 16
15
:
4
/ Line input jacks
1
3 4 5 6
17
"DYNAMIC"
"DIGITAL"
/ Guitar input jack
2
"INPUT + GUITAR/MIC"
9
10
11
Condenser Mic
The UA-3 supports
small multimedia
microphones used for
adding narration, and
is compatible with
plug-in powered
monaural microphones.
The UA-3 is not
compatible with the
phantom-powered,
condenser microphones
typically used for
music. It is also
incompatible with the
.
1
stereo microphones
sometimes supplied
with MDs.
You cannot play back
computer audio data
when DIGITAL is
:
14 selected.
If you are recording
only from the line
inputs, disconnect the
cables from the Guitar
input jack and the Mic
input jack.