Monitoring Function Of Remote Controller Switch - Toshiba RAV-SM562KRT-E Service Manual

ON-SITE SETTING AND OTHERS (Continued)

1.7 Monitoring Function of Remote Controller Switch

■ ■ ■ ■ ■ Calling indication of sensor temperature
<Description>
Calls the service monitor mode from the remote controller to
monitor sensor temperatures of the remote controller, indoor units,
and outdoor unit.
<Procedure>
Press and
1
to call the service monitor mode.
"Service monitor" lights up and the header indoor unit number is
displayed first, and then temperature of code "
Choose a sensor number (code) you want to monitor with
2
buttons.
The following table lists sensor numbers.
Code Data
00 Room temp. under control *1
01 Room temp. (R/C)
02 Indoor unit intake temp.
03 Indoor unit coil temp. TCJ
04 Indoor unit coil temp. TC
05 Indoor unit coil temp. TC1
*1 Header indoor unit only under group control
Choose an indoor unit you want to monitor with
3
units and outdoor unit in the same control group.
Press to return to the normal indication.
4
on the R/C simultaneously for 4 seconds or more
Code
60
61
62
63
64
65
" is displayed.
Data
Heat exchange temp. TE
Outside air temp. TO
Discharge temp. TD
Intake temp. TS
–
Heatsink temp. THS
button to monitor sensor temperatures of indoor
– –
59
1
2 4 3
Returns to normal indication.
Operation procedure
1 2 3 4