Table of Contents
Advertisement
SAFETY NOTICE:
Please read this entire manual before you install and use your new room heater. Failure
to follow instructions may result in property damage, bodily injury, or even death.
Contact local building or fire officials about restrictions and installation inspection
requirements in your area.
Planning The Installation
We suggest that you have an authorized Travis Industries dealer install your fireplace insert. If you
install the fireplace insert yourself, your authorized dealer should review your installation plans.
Check with local building officials for any permits required for installation of this fireplace insert and
notify your insurance company before proceeding with installation.
Preparation for Installation
•
Check for damage to the exterior of the fireplace insert (dents should be reported, scratches can be
fixed by applying touch up paint).
•
Check the interior of the firebox (replace cracked firebrick and make sure baffle is in place).
The fireplace insert can be lightened by removing the firebricks and baffle (pg 25) - replace before
operation.
Additional Accessories Needed for Installation
1
Door Shell (Black 99300195 Brass 99300196 or Pewter 99300197 - see pg 29)
2
Surround Panels (see page 31)
Installation Considerations
Installation Type
Insert with Positive Flue (Full Reline)
(Page 12)
Insert with Direct Connect Flue
(Page 13)
© Travis Industries
Installation
(for qualified installers only)
100-01162
Considerations
• Provides best draft
• Easiest to clean
• Provides good draft
• Requires fireplace block-off plate - see page 11
7
4041105
Advertisement
Table of Contents
