Table of Contents
Advertisement
6
Installation Options:
•
Masonry Fireplace Insert
WARNING: Do not install this fireplace insert into a
factory-built metal (Z.C.) fireplace.
Heating Specifications:
Approximate Maximum Heating Capacity (in square feet)*
Maximum BTU's per Hour (Cord Wood Calculation)
Overall Efficiency (Oregon Method)
Maximum Burn Time
* Heating capacity will vary depending on the home's floor plan, degree of insulation, and the outside
temperature. It is also affected by the quality and moisture level of the fuel.
Dimensions:
Measure side and
top clearances from
the top plate.
20-1/4"
Weight = 455 lbs.
Emissions:
3.2 Grams Per Hour (EPA Phase II Approved) – Tests conducted by E.E.S.P.C.
© Travis Industries
Features & Specifications
5-5/8"
29-1/4"
100-01162
Features:
•
EPA Phase II Approved
•
2.9 Cubic Foot Firebox Volume
•
Single Operating Control
•
Accepts Logs Up to 24" Long
•
Steel Plate Construction (5/16" & 3/16")
•
Heavy Duty Refractory Firebrick
•
Optional High-Tech Blower
1,200 to 2,250 (Extended)
1,200 to 2,000 (with Flush Kit)
73,300
71.1 %
Up to 12 Hours
21-1/4"
21-3/4"
13-1/2"
18-7/8"
7"
Fireplace Opening -
Extended Position (stock)
1-5/8"
Fireplace Opening -
Flush Position (requires kit)
Figure 1
4041105
Advertisement
Table of Contents
