Listing Label - Travis Industries Lopi Owner's Manual

Freedom fireplace insert
Hide thumbs Also See for Lopi:
Table of Contents

Advertisement

28

Listing Label

Tested to: UL 1482 & ULC S628-M1982
PREVENT HOUSE FIRES - Install and use only in accordance with the manufacturer's installation
and operating instructions. Contact your local building or fire officials about restrictions and
installation inspection in your area. Refer to local building codes and manufacturer's instructions
for precautions required for passing a chimney through a combustible wall or ceiling. Do not run a
chimney connector through a combustible wall or ceiling. Do not connect this unit to a chimney
flue serving another appliance. Clearances may be reduced by methods specified in NFPA 211,
listed wall shields, pipe shields, or other means approved by local building or fire officials.
DANGER: Risk of electrical shock. Disconnect power supply before servicing. Route power cord
away from unit. Do not route power cord under or in front of appliance. Do not obstruct the area
beneath the heater.
K.
L.
M.
N.
COMPONENTS REQUIRED FOR MASONRY FIREPLACE INSTALLATION:
Surround Panels.
Do not remove bricks or mortar from masonry fireplace.
Note: Replace glass with 5mm neoceramic or ceramic glass only.
For use with solid wood fuels only. Operate only with feed door closed - open feed fire only. Do not
use a grate or elevated fire - build fire directly on the hearth.
Manufactured by:
© Travis Industries
Listing Label
DO NOT REMOVE THIS LABEL
Listed Solid Fuel Burning Appliance
Suitable for use in masonry fireplaces.
MODEL: FREEDOM
(FLEX)
Report No. 028-S-63-4
Minumum Clearances
to Combustible Materials
Fireplace Insert Installation
Freedom Bay
Mantle
32.0" 813mm
with Mantle Shield
19.0" 483mm
Top Facing
30.0" 762mm
with Shield
17.0" 432mm
Adjacent Sidewall
15.0" 381mm
Side Facing
13.5" 343mm
U.S. ENVIRONMENTAL
PROTECTION AGENCY
Certified to comply with July 1990
particulate emission standards.
4800 Harbour Pointe Blvd. SW
Mukilteo, WA 98275
www.travisproducts.com
SERIAL
NUMBER
Insert Clearance Diagram
MANTEL
K
M
INSERT
8
16
HEARTH
Front 16.0 in.
Sides 8.0 in.
Date of Manufacture
2009
2010
Jan
Feb
May
Jun
Sep
Oct
100-01162
L
N
EXTENSION
2011
2012
Mar
Apr
Jul
Aug
Nov
Dec
0225 (IGN)
4041105

Advertisement

Table of Contents
loading

Table of Contents