Sms Command; Basic Sms Commands; Position Report; Set Interval For Automatic Timed Report - Topten TK310 User Manual

Gps vehicle tracker
Table of Contents

Advertisement

TOPTEN GPS

5 SMS Command

TK310 will only accept commands from a user with the correct password. Commands with wrong
password are ignored. The default password is 000000.

5.1 Basic SMS Commands

5.1.1 Position Report

To know the location of your TK310, send an SMS or make a telephone call directly to TK310 and it will
report its location by SMS.
Command: W<password>,<000>
Notes: The default password is 000000.
Example:
SMS sent: W000000,000
SMS received:
Latitude = 22 32 36.63N Longitude = 114 04 57.37E, Speed = 2.6854Km/h, 2008-12-24,01:50
To get TK310's position by another easier way:
(a) Call TK310 using your mobile phone.
(b) After listening to the ring for 10 - 20 seconds, hang up the phone.
(c) Then after 20 second, your mobile phone will receive a position SMS.

5.1.2 Set Interval for Automatic Timed Report

Description: Automatic timed reports will be sent to your mobile phone according to the time interval you
set.
Command: W<password>,002,XXX
Notes: XXX is the interval in minute. If XXX=000 it will stop tracking
Example:
SMS sent: W000000,002,005
SMS received: Set Timer Ok/005
TK310 will then report its location by SMS every 5 minutes.

5.1.3 Stop Automatic Timed Report

Description: Automatic timed reports will stop once TK310 receives stop command.
Command: W<password>,002,000
Example:
SMS sent: W000000,002,000
SMS received: Set Timer Ok/000
TK310 will stop automatic timed report
For more detailed SMS commands please go to Chapter 8 - SMS Command List
5.2 GPRS Settings by SMS
Tracking via GPRS, you should set IP, Port and APN for TK310.
Ensure that your SIM card in TK310 supports GPRS connection prior to setting.
- 8 -

Advertisement

Table of Contents
loading

Table of Contents