Initial Settings - Sanyo VPC-T1496 Instruction Manual

Initial Settings

The language & date/time needs to be set if and when:
The camera is turned on for the first time.
The camera is turned on after leaving the camera without the battery for an
extended period of time.
1. Press the ON/OFF button to turn the power on.
2. Press any button to enter language setup. Select the displayed language with the
/ /
3. Select the date format with the
4. Select the item's field with the
time with the
5. After confirming all settings are correct, press the SET button.
Half press the shutter button or press the MENU button will enter capture mode
without saving the settings.
Setting the Date and Time
When the date and time information is not displayed
on the LCD monitor, follow these
steps to set the correct date and time.
1. Press the MODE button, and set the camera
mode to [
2. Press the MENU button.
3. Select the [Setup] at the end of the Menu with the
/ buttons, and press the SET button.
4. Select [Date/Time] with the
press the SET button.
5. Select the date format with the
press the SET button.
Select the item's field with the
and adjust the value for the date and time with
the
The time is displayed in 24-hour format.
After confirming all settings are correct, press
the SET button.
6. To exit from the [Setup] menu, press the MENU
button.
EN-18
Downloaded from www.Manualslib.com
/ buttons and press the SET button.
/ buttons.
] or [ ]; or press the 7 button.
/ buttons.
manuals search engine
/ buttons, and press the SET button.
/ buttons and adjust the value for the date and
/ buttons, and
/ buttons, and
/ buttons
MENU SET
: :
MENU SET