Specifications
Display
Measurements
Memory Card
Datalogger Sampling Time
Temperature Compensation
Display update rate
Data Output
Operating Temperature
Operating Humidity
Power Supply
Battery life
Weight
Dimension
Temperature
Relative Humidity
Barometric Pressure
Note: Above specification tests under the environment RF Field Strength less than 3 V/M & frequency
less than 30 MHz only.
All EU users are legally bound by the Battery Ordinance to return all used batteries to
community collection points or wherever batteries / accumulators are sold.
Disposal in household trash or refuse is prohibited.
Disposal: Follow the valid legal stipulations in respect of the disposal of the device at the
end of its lifecycle
Other Battery Safety Reminders
Never dispose of batteries in a fire. Batteries may explode or leak.
Never mix battery types. Always install new batteries of the same type.
All rights reserved including the right of reproduction in whole or in part in any form
60 x 50 mm (2.4 x 2.0") LCD
Temperature, Relative Humidity, and Barometric Pressure
SD memory card, 1 GB to 16 GB
5/10/30/60/120/300/600 seconds or Automatic
Automatic
Approx. 1 second
RS 232 Serial Interface
0 to 50°C (32 to 122°F)
Less than 90% RH
Six (6) 'AAA' Alkaline or heavy duty 1.5 V batteries or
9V AC adaptor
Dependent on sample rate, for new alkaline batteries and 60 second
sampling time, > one month is typical (fast sample rates will
significantly reduce battery life)
282 g (0.62 lbs.)
132 x 80 x 32mm (5.2 x 3.1 x 1.3")
Range
0.0 to 50.0 °C
32.0 to 122.0°F
70 to 90%
10 to 70%
10.0 to 1000.0 hPa
1000.1 to 1100.0 hPa
7.5 to 825.0 mmHg
0.29 to 32.48 inHg
Copyright © 2013 FLIR Systems, Inc.
ISO-9001 Certified
www.extech.com
7
Resolution
Accuracy (of reading)
0.1°C
± 0.8°C
0.1°F
± 1.5°F
0.1%
± (4% of rdg + 1% RH)
0.1%
± 4% RH
0.1
± 2 hPa
0.1
± 3 hPa
0.1
± 1.5 mmHg
0.01
± 0.1 inHg
SD700-EU-EN V2.4 07/13
Need help?
Do you have a question about the SD700 and is the answer not in the manual?
Questions and answers