Konica Minolta bizhub 751 User Manual page 9

1
No. Part name
9 [Start] key
10 Data indicator
11 [C] (clear) key
12 Keypad
13 [Enlarge Display] key
14 [Accessibility] key
15 [Power Save] key
16 [Access] key
17 Brightness dial
18 [Fax/Scan] key
19 [Copy] key
1-4
Description
Press to start the operation. When this machine is ready to begin the oper-
ation, the indicator on the [Start] key lights up in blue. If the indicator on the
[Start] key lights up in orange, the operation cannot begin.
Press to restart a stopped job.
Flashes in blue while a print job or fax is being received.
Lights up in blue while a print job or fax is queued to be printed or is being
printed.
Press to clear a value (such as the number of copies, a zoom ratio, or a size)
entered using the keypad.
Use to type in the number of copies to be produced.
Use to type in the zoom ratio.
Use to type in the various settings.
Press to enter or exit Enlarge Display mode.
Press to display the screen for specifying settings for user accessibility
functions.
Press to enter Low Power mode. While the machine is in Low Power mode,
the indicator on the [Power Save] key lights up in green and the touch panel
goes off. To cancel Low Power mode, press the [Power Save] key again.
If user authentication or account track settings have been applied, press
this key after entering the user name and password (for user authentication)
or the account name and password (for account track) in order to use this
machine.
Use to adjust the brightness of the touch panel.
Press to enter Fax/Scan mode.
While the machine is in Fax/Scan mode, the indicator on the [Fax/Scan] key
lights up in green.
Press to enter Copy mode. (As a default, the standard-sized Copy mode
screen is displayed.)
While the machine is in Copy mode, the indicator on the [Copy] key lights
up in green.
Before use
751/601