Konica Minolta bizhub 751 User Manual page 71

3
– Otherwise, touch [Enter Registered No.], use the keypad to type in destination registration number,
and then touch [Apply].
– To specify an additional recipient, touch [Next Destination], and then enter the number.
– To return to the Address Book screen, touch [Main Screen].
– When typing in a fax number:
[Tone]: If pulse dialing is being used, touch this button to send a push-button tone. This is used
when a fax information service is being used. "T" appears in the screen. If pulse dialing is being
used, use [
[Pause]: Touch this button to insert a pause when dialing. Touch [Pause] once to insert a 1-second
pause. In addition, multiple pauses can be entered. "P" appears in the screen. If the PBX (private
branch exchange) connection is enabled, touch [Pause] after the outside line access code (for
example, "0") for reliable dialing when transmitting from an inside line to an outside line. "P" appears
in the screen.
[–]: Touch this button to insert the dash as separator symbol while dialing. This has no effect on the
dialing. "–" appears in the screen.
– To change a character in the entered text, touch [
to be changed, and then touch [Delete].
3
Touch [OK].
– If a destination registration number is entered, touch [OK], and then touch [OK] in the next screen
that appears.
3-12
] to switch to a push-button tone.
Using fax/scan functions
] and [ ] to move the cursor to the character
751/601