General Competition Maintenance - Honda CRF250X 2006 Owner's Manual & Competition Handbook

General Competition Maintenance

Perform maintenance on firm, level ground using
the side stand, a workstand, or equivalent
support.
Use genuine Honda parts or their equivalent
when servicing your motorcycle.
Clean parts in non-flammable (high flash point)
cleaning solvent (such as kerosene) when
disassembling. Lubricate any sliding surface,
O-rings, and seals before reassembling. Grease
parts by coating or filling where specified.
After any engine disassembly, always install new
gaskets, O-rings, cotter pins, piston pin clips,
snap rings, etc. when reassembling. After
reassembly, check all parts for proper installation
and operation.
All Pre-ride Inspection Items
Refer to Pre-ride Inspection page 11.
29
Servicing Your Honda