Honda CRF250X 2006 Owner's Manual & Competition Handbook page 121

27.Install the handlebar (34), mounting rubbers
(35), washers and handlebar holder nuts (36)
and tighten the handlebar holder nuts to the
specified torque:
32 Ibf·ft (44 N·m, 4.5 kgf·m)
(36)
(34) handlebar
(35) mounting rubbers
(36) washers/handlebar holder nuts
28.Install the front visor by aligning its grommets
(37) with the tabs (38) on the steering stem.
(38)
(37) front visor grommets (38) tabs
29.Install and tighten the front visor bolts (39).
Install the handlebar pad (40).
(34)
(35)
(39) front visor bolts
(40) handlebar pad
30.With the front brake applied, pump the fork
up and down several times to seat the axle and
check front brake operation.
(37)
31.While keeping the forks parallel, alternately
tighten the right axle pinch bolts (41) to the
specified torque:
15 Ibf·ft (20 N·m, 2.0 kgf·m)
Front Suspension Adjustments
NOTICE
To avoid damage when torquing the axle pinch
bolts, be sure the axle is seated firmly onto the
left fork leg clamp inner surface.
(40)
32.Install the tripmeter cable (42) and tighten the
lock nut securely.
(39)
(41) axle pinch bolts
33.Install the disc cover (43) and tighten the bolts
(44) to the specified torque:
10 Ibf·ft (13 N·m, 1.3 kgf·m)
(43) disc cover
34.Turn the rebound damping adjusters back to
their original settings.
(42)
(41)
(42) tripmeter cable
(43)
(44)
(44) bolts
Adjustments for Competition
117