Step 9 Position Dishwasher Under Countertop; Step 10 Level Dishwasher - GE WX09X70910 Installation Instructions Manual

STEP 9 POSITION DISHWASHER UNDER COUNTERTOP

• Check to be sure that wires are secure under the
dishwasher and not pinched or in contact with door
springs or other dishwasher components.
TIP: Check tub insulation blanket, if equipped. It should
be positioned so it is not bunched up or interfering with
door springs. Check by opening and closing the door.
• Push dishwasher into cabinet. The front corners of the
dishwasher door should be fl ush with cabinet doors.
Be careful not to dent font panel with knees or dam-
age countertop or cabinets with dishwasher parts.

STEP 10 LEVEL DISHWASHER

IMPORTANT
be level for proper dish rack operation and wash perfor-
mance.
• Place level on
door and rack
track inside the
tub as shown to
check that the
dishwasher is Check
Level
level.
Front
to Back
Figure Q
Installation Instructions
–
Dishwasher must
Check
Level
Side
To Side
Do Not Push Against
Front Door Panel With
Knee. Damage to The
Door Panel Will Occur.
Figure P
• Level the dishwasher
by adjusting the four
leveling legs individu-
ally.
TIP: Pull lower rack out, about halfway. Check to
be sure the rack does not roll forward or back into
dishwasher. If the rack rolls in either direction, the dish-
washer must be leveled again.
• If door hits the tub, the dishwasher is not installed
correctly. Adjust leveling legs to align door to tub.
8
Reposition Dishwasher
by Grasping Both
Sides With Hands
Turn Legs
to Adjust
Figure R