(5) Outdoor unit information data display (Displayed on inverter unit only)
SW03
SW02
SW01
1 to 3
1 to 16
4
5
6
7
8
9
10
11
12
NOTE: The indoor address number is set by selecting SW02 or SW03
SW03
1
2
3
•
7 segment display A, B
12
Self diagnostic display information
Indoor communication/
receive status
Indoor check code
Indoor horse power
Indoor demand command (S code) A [01] to [48]: Indoor address number
Indoor PMV opening
Indoor saturation temperature
Indoor TA sensor
Indoor TC2 sensor
Indoor TC1 sensor
SW02
Outdoor unit number
1 to 16
SW02 set-up number
1 to 16
SW02 set-up number + 16
1 to 16
SW02 set-up number + 32
Display A
D716
Outdoor units
Displayed content
A [01] to [48]: Indoor address number
B [1]: Receiving, [- -]: No connection
A [01] to [48]: Indoor address number
B [—]: No error, a check code is displayed when an error occurs
A [01] to [48]: Indoor address number
B Corresponded HP is displayed. ([--]: No connection)
[0,8], [1], [1,2], [1,5], [1,7], [2],
[2,5], [3], [3,2], [4], [5]
B [0] In STOP time, [3] to [F]: During operation (S3 to SF)
A [01] to [48]: Indoor address number
B Data is displayed as pulse
A [01] to [48]: Indoor address number
B Data is displayed as temperature
A [01] to [48]: Indoor address number
B Data is displayed as temperature
A [01] to [48]: Indoor address number
B Data is displayed as temperature
A [01] to [48]: Indoor address number
B Data is displayed as temperature
Display B
D717
D714
70
7 segment display A
[01] to [16]
[17] to [32]
[33] to [48]
D715