Switch Positions At Shipment From The Factory - Toshiba HFCR407C Service Manual

(4) Switch positions at shipment from the factory

Switch No. Function
SW01 Indoor unit No.
SW02 Network address set-up
SW03 TA adjust
SW06 Ceiling height
SW07 Central control
switching
SW08 Indoor HP set-up
Control circuit configuration
Indoor units
Description
Group operation control set-up
Set-up 1: Master unit
2 to 16: Slave units
ON Address set-up by remote controller is
unavailable.
No. 7
OFF Address set-up by remote controller is
available.
For contents of address set-up, see the next page.
No. 1 ON Normal
No. 2 OFF Normal
No. 1 OFF Normal
No. 2 OFF Normal
When height of ceiling exceeds 2.7 m set No. 1 to ON.
ON Communication error
(Non relay)
No. 1
OFF (Normal)
Communication OK
No. 2 OFF Normal
Factory set
For contents of switch set-up, see section (5)
73
Position at shipment
from factory
13