For Macintosh Users - Epson Aculaser C2000 Setup Manual

For Macintosh Users

Your Macintosh must meet the following requirements to use the
driver included with the printer:
Mac OS 7.5 or later*
* To turn off QuickDraw GX, first make sure the Caps Lock key is unlocked. Then,
while holding down the spacebar, restart your Macintosh. The Extensions
Manager will open. Clear the QuickDraw GX check box, then close the
Extensions Manager.
Note:
Mac OS 8.6 and higher support the Type B IEEE 1394 (FireWire)
Interface Card (C82372 ). The Windows and Adobe Postscript
printer driver for the EPSON AcuLaser C2000 do not support the
Type B IEEE 1394 Interface.
c
Caution:
Turn off any anti-virus software before installing the printer
driver.
1. Insert the printer software CD-ROM.
2. Double-click the Installer icon.
3. Click Install and follow the on-screen instructions.
41
Installing the Printer Driver
Click here