For United Kingdom Users - Epson Aculaser C2000 Setup Manual

Not blown directly into the user's face
Vented directly out of the building whenever possible

For United Kingdom Users

The EPSON AcuLaser C2000 is a page printer which utilizes a
semiconductor laser.
There is no possibility of danger from the laser, provided that the
printer is operated according to the instructions in the guides
provided.
Since radiation emitted by the laser is completely confined within
protective housings and external covers, the laser beam cannot
escape from the machine during any phase of user operation.
w
Warning:
The use of controls, or the performance of procedures and
adjustments other than those specified in this guide may result
in hazardous radiation exposure.
This is a semiconductor laser. The maximum power of the laser
diode is 15 m W and the wavelength is 775 to 795 nm.
Use of options
Epson (UK) Limited shall not be liable against any damages or
problems arising from the use of any options or consumable
products other than those designated as Original EPSON
Products or EPSON Approved Products by Epson (UK) Limited.
Safety information
Warning: This appliance must be earthed. Refer to rating plate
for voltage and check that the appliance voltage corresponds to
the supply voltage.
9
Safety Instructions